401 C ASPHALT PLANT AND EQUIPMENT REQUIREMENTS

Product Related Information

  • 400-401 Asphalt Concrete Pavements – General

    Table 401.06-1 provides minimum surface temperature requirements based on the thickness of the course being placed. The air temperature must be 40°F for all surface courses. For any surface course using a polymer modified asphalt binder the surface and air temperature …

    GET A QUOTE
  • SECTION 401 ASPHALT MIXING PLANT REQUIREMENTS

    401—1 SECTION 401 ASPHALT MIXING PLANT REQUIREMENTS . 401.01 DESCRIPTION. Provide and maintain a plant and all equipment necessary to produce and test asphalt mixtures. 401.02 EQUIPMENT. 401.02.01 All Asphalt Mixing Plants. Ensure that all asphalt mixing plants are inspected and approved by the Department before initial use and a minimum of once

    GET A QUOTE
  • GUIDE FOR SPECIFYING ASPHALT PAVEMENTS FOR LOCAL

    Hot Mix Asphalt (HMA), at the contractor's option. [Link to Section 402] 402.02 Quality Control This Section sets the standards for contractor quality control. The first part relates to the production of the asphalt paving mix and requires that it be supplied from a Certified HMA Plant in accordance with ITM

    GET A QUOTE
  • SPECIAL PROVISION SPECIFICATION 962 – WARM MIX …

    September 11, 2011 SPECIAL PROVISION SPECIFICATION 962 – WARM MIX ASPHALT (WMA) PAVEMENTS - MARSHALL SP-962 - 5 962-4.12 Compaction Requirements - Shall meet the requirements of article 401-4.12. 962-4.13 Joints, Trimming Edges and Cleanup - Shall meet the requirements of article 401 …

    GET A QUOTE
  • AND INTEGRAL CURB AND GUTTER of the STANDARD

    5. Tack Coat shall be CSS-1-h asphalt (diluted with 50% water) conforming to AASHTO M 208. C. Construction Methods 1. Construction methods, including bituminous concrete plant and equipment requirements, bituminous concrete pavers, vehicles, and rollers shall conform to "DelDOT Specifications" Section 401. D. Submissions 1. Job Mix Formula 2.

    GET A QUOTE
  • Draft - modot.org

    Dec 01, 2017 · Sec 403 mixture, design level C, E, or F with the same or smaller nominal maximum size aggregate in lieu of any Sec 401 mixture. When a Sec 403 mixture is substituted, all Sec 401 requirements including QC/QA requirements shall remain except the layer thickness requirements of Sec 403 shall apply. 401.2.3 Commercial Mixture.

    GET A QUOTE
  • CITY OF COLUMBUS, OHIO SUPPLEMENT 1101 ASPHALT …

    This supplement contains equipment requirements for asphalt concrete mixing of each load of asphalt mixture as required in 401.21. Use truck scales that indicate the total weight within 20-pound (10 kg) increments and have a rated capacity of at least 10 percent plant system requirements in section 1101.02, print the information on each

    GET A QUOTE
  • Changes to FAA Asphalt Specification P – 401

    Recently the standard asphalt specifications for construction of airports were updated to include Asphalt Pavement Analyzer (APA) results. The December 2018 FAA Advisory Circular states "P-401:…added use of the Asphalt Pavement Analyzer…eliminating the need to run stability and flow when using the Marshall Methods and allowing the same asphalt design criteria in Table 1 to apply

    GET A QUOTE
  • 401A96M. ASPHALT CONCRETE PAVEMENT

    401.02 Materials. The plant mixed asphalt concrete includes a mixture of aggregate, filler or blending sand, if acceptable, and asphalt cement. Size, uniformly grade, and combine aggregates so that the resulting mixture meets the grading requirements of the job mix formula. Conform to the following: Asphalt Cement 702.01. Emulsified Asphalt 702.04

    GET A QUOTE
  • SPECIAL PROVISION SPECIFICATION 962 – WARM MIX …

    September 11, 2011 SPECIAL PROVISION SPECIFICATION 962 – WARM MIX ASPHALT (WMA) PAVEMENTS - MARSHALL SP-962 - 5 962-4.12 Compaction Requirements - Shall meet the requirements of article 401-4.12. 962-4.13 Joints, Trimming Edges and Cleanup - Shall meet the requirements of article 401 …

    GET A QUOTE
  • SP-960 Ground Tire Rubber Modified Asphalt (SepLiming11)

    Meet the plant and equipment requirements as well as Construction Requirements of Supplemental Specification 401 or Special Provision 959 as applicable, except as modified herein. Superpave laboratory specimens shall be compacted as specified in Special Provision …

    GET A QUOTE
  • BATCHING AND MIXING

    5-694.401 CHECKING BATC H PLANT OPERATION Check to ensure accuracy and dependable operati on of the proposed equipment and methods prior to the start of concreting operations and after ma king any changes in the location or arrangement of the batching plant. Plant calibration is the responsibility of the Producer/Contractor.

    GET A QUOTE
  • 401 KAR 52:001. Definitions for 401 KAR Chapter 52.

    (16) "Batch mix plant" means a source or affected facility that produces hot mix asphalt by heating and drying the aggregate in a dryer before separating and mixing it with asphalt cement in separate batches. (17) "Cabinet" is defined by KRS 224.1-010(9). (18) "Capital expenditure" is defined by 40 C.F.R. 60.2.

    GET A QUOTE
  • 23218 Attachment 11 - Office of General Services

    HOT MIX ASPHALT CONCRETE PAVEMENT WITH CRUSHED GLASS SCOPE: This specification covers the requirements for the addition of crushed glass to asphalt concrete mixes. The provisions of Section 401 – Plant Production and Section 402 - Hot Mix Asphalt (HMA) Pavements applies except that …

    GET A QUOTE
  • GUIDE FOR SPECIFYING ASPHALT PAVEMENTS FOR LOCAL

    Hot Mix Asphalt (HMA), at the contractor's option. [Link to Section 402] 402.02 Quality Control This Section sets the standards for contractor quality control. The first part relates to the production of the asphalt paving mix and requires that it be supplied from a Certified HMA Plant in accordance with ITM

    GET A QUOTE
  • BATCHING AND MIXING

    5-694.401 CHECKING BATC H PLANT OPERATION Check to ensure accuracy and dependable operati on of the proposed equipment and methods prior to the start of concreting operations and after ma king any changes in the location or arrangement of the batching plant. Plant calibration is the responsibility of the Producer/Contractor.

    GET A QUOTE
  • 400-401 - dot.state.oh.us

    DocumentationRequirements - 401 Asphalt Concrete Pavements-General. General. General requirements for mix production and construction ofasphalt concrete pavement courses are included in Item 401. Other specific requirements for flexiblepavement production, quality control, and mix design are included in Item 402Asphalt Concrete Mixing Plants; Item 403Asphalt Concrete Quality Control andAcceptance; …

    GET A QUOTE
  • 2017 INSTRUCTION MANUAL - West Virginia

    west virginia division of highways 2017 instruction manual asphalt plant technician

    GET A QUOTE
  • MP 401.03.50 SUPERCEDES: MARCH, 2000 REVISED: …

    We are submitting our asphalt concrete hot-mix asphalt Quality Control Plan, developed in accordance with Section 401 of the _____ Standard Specifications, the _____ Supplemental Specifications, MP 401.03.50 and the _____Special Provisions. 1. Make of Plant Type Location

    GET A QUOTE
  • 2019 Asphalt Specification Update

    SC-M-401 (06/07) Mixing Plants for Hot-Mix Asphalt SC-M-402 (01/18) Materials Properties for Asphalt Mixtures SC-M-403 (04/16) • Check each "active" plant and roadway tech a minimum of once per year. • Important to notify IA Dept. when you have a new technician on staff. –A updated list required and submitted annually in January

    GET A QUOTE